The .006" nozzle (part# 1006) is the smallest standard nozzle orifice available. This nozzle is ideal for applications requiring extremely low flow, with small droplet size, minimal moisture and complete evaporation. The nozzle should not be used at pressures below 500 PSI.

 

The .008" nozzle (part# 1008) is ideal for applications requiring less flow, with small droplet size, minimal moisture, and complete evaporation. It can be used for indoor humidification or outdoor cooling. The nozzle should not be used at pressures below 140 PSI.

 

The .012" nozzle (part# 1012) is most commonly used in areas with extreme heat and low humidity or where the nozzles are placed high above the area to be cooled. It provides comparable results to the .008" nozzle with an increased flow rate. It can be used both indoors and outdoors with complete evaporation. This nozzle will work at pressures of 50 PSI and above.

 

The .015" nozzle (part# 1015) is mostly used for outdoor applications where sufficient airflow and clearance allow for complete evaporation and where higher flows are required.